00001 #ifndef _DEV_DEBUG_H_ 00002 #define _DEV_DEBUG_H_ 00003 00004 /* 00005 * Copyright (C) 2001-2005 by egnite Software GmbH. All rights reserved. 00006 * 00007 * Redistribution and use in source and binary forms, with or without 00008 * modification, are permitted provided that the following conditions 00009 * are met: 00010 * 00011 * 1. Redistributions of source code must retain the above copyright 00012 * notice, this list of conditions and the following disclaimer. 00013 * 2. Redistributions in binary form must reproduce the above copyright 00014 * notice, this list of conditions and the following disclaimer in the 00015 * documentation and/or other materials provided with the distribution. 00016 * 3. Neither the name of the copyright holders nor the names of 00017 * contributors may be used to endorse or promote products derived 00018 * from this software without specific prior written permission. 00019 * 00020 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS 00021 * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT 00022 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS 00023 * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE 00024 * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, 00025 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, 00026 * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS 00027 * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED 00028 * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, 00029 * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF 00030 * THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 00031 * SUCH DAMAGE. 00032 * 00033 * For additional information see http://www.ethernut.de/ 00034 */ 00035 00036 /* 00037 * $Log$ 00038 * Revision 1.16 2009/03/05 22:16:57 freckle 00039 * use __NUT_EMULATION instead of __APPLE__, __linux__, or __CYGWIN__ 00040 * 00041 * Revision 1.15 2008/08/11 06:59:59 haraldkipp 00042 * BSD types replaced by stdint types (feature request #1282721). 00043 * 00044 * Revision 1.14 2008/08/06 12:51:12 haraldkipp 00045 * Added support for Ethernut 5 (AT91SAM9XE reference design). 00046 * 00047 * Revision 1.13 2008/02/15 17:00:24 haraldkipp 00048 * Spport for AT91SAM7SE512 added. 00049 * 00050 * Revision 1.12 2007/10/04 20:33:55 olereinhardt 00051 * Support for SAM7S256 added 00052 * 00053 * Revision 1.11 2006/08/31 19:01:08 haraldkipp 00054 * Using devDebug2 for the DBGU output was a bad idea. Some AT91 chips 00055 * provide more than two UARTs. We now use devDebug to specify the DBGU 00056 * device. Baudrate calculations failed on CPUs running on a processor 00057 * clock, which differs from a futher divided main clock. This had been 00058 * fixed. 00059 * 00060 * Revision 1.10 2006/07/05 07:45:29 haraldkipp 00061 * Split on-chip interface definitions. 00062 * 00063 * Revision 1.9 2006/02/23 15:34:00 haraldkipp 00064 * Support for Philips LPC2xxx Family and LPC-E2294 Board from Olimex added. 00065 * Many thanks to Michael Fischer for this port. 00066 * 00067 * Revision 1.8 2005/07/26 15:49:59 haraldkipp 00068 * Cygwin support added. 00069 * 00070 * Revision 1.7 2005/04/05 17:49:06 haraldkipp 00071 * Make it work on Wolf, but breaks AT91EB40A. 00072 * 00073 * Revision 1.6 2005/02/10 07:06:50 hwmaier 00074 * Changes to incorporate support for AT90CAN128 CPU 00075 * 00076 * Revision 1.5 2004/10/03 18:39:12 haraldkipp 00077 * GBA debug output on screen 00078 * 00079 * Revision 1.4 2004/09/08 10:53:14 haraldkipp 00080 * Our first device for the EB40A 00081 * 00082 * Revision 1.3 2004/04/07 12:13:57 haraldkipp 00083 * Matthias Ringwald's *nix emulation added 00084 * 00085 * Revision 1.2 2004/03/16 16:48:28 haraldkipp 00086 * Added Jan Dubiec's H8/300 port. 00087 * 00088 * Revision 1.1.1.1 2003/05/09 14:41:05 haraldkipp 00089 * Initial using 3.2.1 00090 * 00091 * Revision 1.1 2003/04/21 16:57:05 harald 00092 * First check in 00093 * 00094 */ 00095 00096 #include <cfg/arch.h> 00097 #include <sys/device.h> 00098 #include <dev/uart.h> 00099 00100 #include <stdint.h> 00101 00107 /* 00108 * Available devices. 00109 */ 00110 #if defined(__AVR__) 00111 00112 extern NUTDEVICE devDebug0; 00113 #ifdef __AVR_ENHANCED__ 00114 extern NUTDEVICE devDebug1; 00115 #endif 00116 00117 #elif defined(__H8300H__) || defined(__H8300S__) 00118 00119 /* SCIs (USARTs) in the H8/3068F; it should be adjusted for other H8 devices */ 00120 extern NUTDEVICE devDebug0; 00121 extern NUTDEVICE devDebug1; 00122 extern NUTDEVICE devDebug2; 00123 00124 #elif defined(__arm__) && !defined(__CORTEX__) 00125 #ifdef MCU_AT91R40008 00126 extern NUTDEVICE devDebug0; 00127 extern NUTDEVICE devDebug1; 00128 #elif defined(MCU_AT91SAM7X) || defined (MCU_AT91SAM7S256) || defined(MCU_AT91SAM9260) || defined (MCU_AT91SAM7SE512) || defined(MCU_AT91SAM9XE512) || defined(MCU_AT91SAM9G45) 00129 extern NUTDEVICE devDebug; 00130 #elif defined(MCU_GBA) 00131 extern NUTDEVICE devDebug0; 00132 #elif defined(MCU_LPC2XXX) 00133 extern NUTDEVICE devDebug0; 00134 extern NUTDEVICE devDebug1; 00135 #elif defined(MCU_ZERO) 00136 extern NUTDEVICE devDebug0; 00137 #endif 00138 #elif defined(__arm__) && defined(__CORTEX__) 00139 #if defined(MCU_STM32F10X) 00140 extern NUTDEVICE *devDebug0; 00141 #elif defined(MCU_LPC17xx) 00142 extern NUTDEVICE devDebug0; 00143 extern NUTDEVICE devDebug1; 00144 extern NUTDEVICE devDebug2; 00145 extern NUTDEVICE devDebug3; 00146 #endif 00147 00148 #elif defined(__m68k__) 00149 00150 #elif defined(__AVR32__) 00151 extern NUTDEVICE devDebug0; 00152 extern NUTDEVICE devDebug1; 00153 extern NUTDEVICE devDebug2; 00154 extern NUTDEVICE devDebug3; 00155 #endif 00156 00157 #ifdef __NUT_EMULATION__ 00158 extern NUTDEVICE devDebug0; 00159 extern NUTDEVICE devDebug1; 00160 #endif 00161 00162 #endif /* #ifndef _DEV_DEBUG_H_ */