Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met:

1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer. 2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution. 3. Neither the name of the copyright holders nor the names of contributors may be used to endorse or promote products derived from this software without specific prior written permission.

THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

For additional information see http://www.ethernut.de/

Id:: logtime.c 3538 2011-08-10 16:34:10Z haraldkipp

Shows how to use syslog and SNTP.

#include <stdio.h>
#include <io.h>

#include <arpa/inet.h>
#include <net/route.h>
#include <pro/dhcp.h>
#include <pro/sntp.h>

#include <sys/version.h>
#include <sys/confnet.h>
#include <sys/timer.h>
#include <sys/heap.h>
#include <sys/syslog.h>

#include <dev/board.h>

static char *version = "1.0.1";

/*
 * User configuration.
 */

#define MYMAC   0x00, 0x06, 0x98, 0x00, 0x00, 0x00

#define MYIP    "192.168.192.100"

#define MYMASK  "255.255.255.0"

#define MYGATE  "192.168.192.1"

#define MYLOGD  "192.168.192.222"

#define MYTIMED "130.149.17.21"

#define MYUART  DEV_CONSOLE_NAME

#define MYBAUD  115200

#define MYDEV   DEV_CONSOLE

#define MYTZ    -1


#ifdef __IMAGECRAFT__
#define COMPILERNAME "ICCAVR"
#else
#define COMPILERNAME "GCC"
#endif

/* Result codes. */
#define UART_OK     0x0001
#define STDOUT_OK   0x0002
#define STDERR_OK   0x0004
#define BAUDRATE_OK 0x0008
#define LANDEV_OK   0x0010
#define NETIF_OK    0x0020
#define NETROUTE_OK 0x0040
#define TIMED_OK    0x0080

/*
 * Application entry.
 */
int main(void)
{
    uint32_t baud = MYBAUD;
    uint8_t mac[6] = { MYMAC };
    uint32_t timeserver = inet_addr(MYTIMED);
    int rc = 0;
    time_t now;

    /*
     * Register UART devices, assign stdout and stderr to this device
     * and set the baudrate.
     */
    if(NutRegisterDevice(&MYDEV, 0, 0) == 0) {
        rc |= UART_OK;
        if(freopen(MYUART, "w", stdout)) {
            rc |= STDOUT_OK;
            if(_ioctl(_fileno(stdout), UART_SETSPEED, &baud) == 0) {
                rc |= BAUDRATE_OK;
            }
        }
        if(freopen(MYUART, "w", stderr)) {
            rc |= STDERR_OK;
        }
    }

    /*
     * Print banner.
     */
    if(rc & STDOUT_OK) {
        printf("\n\nTimeLog %s\nNut/OS %s\n", version, NutVersionString());
        puts("Compiled by " COMPILERNAME);
        puts("Configure network");
    }

#ifdef DEV_ETHER
    /*
     * Register LAN device and configure network interface.
     */
    if(NutRegisterDevice(&DEV_ETHER, 0x8300, 5) == 0) {
        rc |= LANDEV_OK;
        if (NutDhcpIfConfig("eth0", 0, 60000) == 0) {
            rc |= NETIF_OK;
        }
        else if (NutDhcpIfConfig("eth0", mac, 60000) == 0) {
            rc |= NETIF_OK;
        }
        else if(NutNetIfConfig("eth0", mac, inet_addr(MYIP), inet_addr(MYMASK)) == 0) {
            rc |= NETIF_OK;
#ifdef MYGATE
            if(NutIpRouteAdd(0, 0, inet_addr(MYGATE), &DEV_ETHER) == 0) {
                rc |= NETROUTE_OK;
            }
#endif
        }
    }

    if(rc & NETIF_OK) {
        /*
         * Set timezone, query SNTP server and set system time.
         */
        if(rc & STDOUT_OK) {
            puts("Query time from " MYTIMED);
        }
        _timezone = MYTZ * 60L * 60L;
        if(NutSNTPGetTime(&timeserver, &now) == 0) {
            rc |= TIMED_OK;
            stime(&now);
        }
    }

    /*
     * Open syslog output and route messages to stderr and to
     * a remote server.
     */
    if(rc & STDOUT_OK) {
        puts("Initialize syslog");
    }
    openlog("logtime", (rc & STDERR_OK) ? LOG_PERROR : 0, LOG_USER);
    if(rc & NETIF_OK) {
        setlogserver(inet_addr(MYLOGD), 0);
    }
    syslog(LOG_INFO, "TimeLog %s started on Nut/OS %s", version, NutVersionString());

    /*
     * Print the result of our initialization.
     */
    if((rc & UART_OK) == 0) {
        syslog(LOG_ERR, "Registering UART device failed");
    }
    else if((rc & STDOUT_OK) == 0) {
        syslog(LOG_ERR, "Assigning stdout failed");
    }
    else if((rc & STDERR_OK) == 0) {
        syslog(LOG_ERR, "Assigning stderr failed");
    }
    else if((rc & BAUDRATE_OK) == 0) {
        syslog(LOG_ERR, "Setting baudrate failed");
    }
    if((rc & LANDEV_OK) == 0) {
        syslog(LOG_ERR, "Registering Ethernet device failed");
    }
    else if((rc & NETIF_OK) == 0) {
        syslog(LOG_ERR, "Configuring network interface failed");
    }
    else {
        syslog(LOG_INFO, "IP %s", inet_ntoa(confnet.cdn_ip_addr));
        syslog(LOG_INFO, "Gate %s", inet_ntoa(confnet.cdn_gateway));
        syslog(LOG_INFO, "Timed " MYTIMED);
        syslog(LOG_INFO, "Syslogd " MYLOGD);
    }

    /*
     * Endless loop.
     */
    for(;;) {
        syslog(LOG_DEBUG, "%d bytes free", NutHeapAvailable());
        NutSleep(60000);
    }
#endif
    return 0;
}