This archive contains an embedded Internet radio.

Hardware Requirements
---------------------

The following hardware has been tested:

- Elektor Internet Radio EIR1.0C
- Atmel AT91SAM9260-EK with Calypso board
- egnite Ethernut 2.1 with Medianut 2
- egnite Ethernut 3.0 with Medianut 2

The AT91SAM7X256-EK may work as well, but in a very limited way.


Software Requirements
---------------------

You will need a cross toolchain for your target board. When running
Windows on your host, check the following:

- http://www.yagarto.de/ for ARM targets
- http://winavr.sourceforge.net/ for AVR targets

You further need the latest Nut/OS distribution. We tested the radio
software with 4.9.6 beta. Visit

- http://www.ethernut.de/en/download/


Building the Binaries
---------------------

Install Nut/OS and the toolchain on your host PC. Configure the
system for your target board. The Atmel kits should work with the
configuration files included in the Nut/OS distribution. 

Special configuration files for Ethernut 2 and 3 are available
in this package in directory conf. Copy them to the Nut/OS
conf directory.

When configured, build the Nut/OS libraries and create a sample
directory using the Nut/OS Configurator. Copy the contents of
the src directory in a new directory of your application sample 
directory. For example, if your application directory is 
ethernut-4.9.6/nutapp, then move the sources to 
ethernut-4.9.6/nutapp/ewebradio.

Change to this new directory, make sure that the binary toolchain
is available on the command line (PATH) and type

  make clean all

This should build the binaries for your target board.

More details are available in the Nut/OS Software Manual:

- http://www.ethernut.de/en/documents/


Optional Modifications
----------------------

Beside changing the source code a few general items can be
configured in the file Makedefs.

