New pages

13 July 2017

• 16:2516:25, 13 July 2017 Hardware/Enut1/Ports (hist | edit) [9,190 bytes] Harald (talk | contribs) (Created page with "<div id="content"> = Ethernut 1 Ports = == Expansion Port == [[File:../../../img/ethernut13h-expansion-pins.png]]<br /> {| ! Pin ! Signal ! Description |- | 1 | '''N/C'''...")
• 16:2416:24, 13 July 2017 Hardware/Enut1/Memmap (hist | edit) [1,479 bytes] Harald (talk | contribs) (Created page with "{| |width="50%"| {| |width="100%"| |} |width="50%"| {| |width="100%"| |} |- | | {| |width="100%"| = Ethernut 1.3 Memory Map = The ATmega128 used on Ethernut 1.3 is a member o...")
• 16:2116:21, 13 July 2017 Hardware/Enut1 (hist | edit) [7,204 bytes] Harald (talk | contribs) (Created page with "<div id="content"> = Ethernut 1.3 Hardware = <br /> == Important Note == Almost all documents including the schematics show or describe the wrong jumper setting for JP2. F...")
• 16:2116:21, 13 July 2017 Hardware/Enut1/BOM (hist | edit) [1,608 bytes] Harald (talk | contribs) (Created page with "{| |width="50%"| {| |width="100%"| |} |width="50%"| {| |width="100%"| |} |- | | {| |width="100%"| = Ethernut 1 Bill of Material = == Version 1.3 Revision G == {| ! Qty ! Val...")
• 09:1109:11, 13 July 2017 Hardware/EIR/Web IF (hist | edit) [5,670 bytes] Harald (talk | contribs) (Created page with "<div id="content"> = EIR Web Interface = There is currently no user interface hardware, such as LCD or push buttons. You'll probably have some great ideas to implement this....")
• 09:1009:10, 13 July 2017 Hardware/EIR/Vorbis Rec (hist | edit) [4,484 bytes] Harald (talk | contribs) (Created page with "<div id="content"> = EIR Ogg Vorbis Recorder = By default, the VS1053 audio codec on the EIR board offers PCM recording only. However, VLSI Solution offers an Ogg Vorbis enc...")
• 09:0909:09, 13 July 2017 Hardware/EIR/Tester (hist | edit) [2,232 bytes] Harald (talk | contribs) (Created page with "<div id="content"> = EIR Hardware Tester = A first preview version 0.1.1 of the EIR Hardware Tester is available in [[../../../arc/eirhwt-0.1.1.zip|this archive]]. It contai...")
• 09:0909:09, 13 July 2017 Hardware/EIR/SPI (hist | edit) [1,963 bytes] Harald (talk | contribs) (Created page with "<div id="content"> = EIR SPI Support = == AT91 Hardware SPI == The SAM7SE offers a single [http://en.wikipedia.org/wiki/Serial_Peripheral_Interface_Bus SPI], which is hardw...")
• 09:0809:08, 13 July 2017 Hardware/EIR/SAM-BA (hist | edit) [3,194 bytes] Harald (talk | contribs) (Created page with "<div id="content"> = EIR Firmware Upload Using SAM-BA = When powering up or resetting the EIR, the SAM7SE CPU will typically start running the firmware currently stored in i...")
• 09:0709:07, 13 July 2017 Hardware/EIR/OpenOCD/SDRAM (hist | edit) [6,697 bytes] Harald (talk | contribs) (Created page with "<div id="content"> = OpenOCD for AT91SAM7SE - Part 5 = This is part 5 of our OpenOCD for AT91SAM7SE tutorial. == Using SDRAM == Compared to other ARM7TDMI...")
• 09:0709:07, 13 July 2017 Hardware/EIR/OpenOCD/Optimize (hist | edit) [9,588 bytes] Harald (talk | contribs) (Created page with "<div id="content"> = OpenOCD for AT91SAM7SE - Part 7 = This is part 7 of our OpenOCD for AT91SAM7SE tutorial. == Optimizing OpenOCD Configurations == Reme...")
• 09:0609:06, 13 July 2017 Hardware/EIR/OpenOCD/NutOs (hist | edit) [5,863 bytes] Harald (talk | contribs) (Created page with "<div id="content"> = OpenOCD for AT91SAM7SE - Part 9 = This is the last part of our OpenOCD for AT91SAM7SE tutorial. == Nut/OS Integration == OpenOCD can...")
• 09:0609:06, 13 July 2017 Hardware/EIR/OpenOCD/JTAG (hist | edit) [8,132 bytes] Harald (talk | contribs) (Created page with "<div id="content"> = OpenOCD for AT91SAM7SE - Part 2 = For the second part of our Tutorial it's assumed, that you have successfully openocd_hardware.html|...")
• 09:0509:05, 13 July 2017 Hardware/EIR/OpenOCD/Hardware (hist | edit) [492 bytes] Harald (talk | contribs) (Created page with "<div id="content"> = OpenOCD for AT91SAM7SE - Part 1 = This is the first part of our OpenOCD for AT91SAM7SE tutorial. == Hardware Setup == There's not muc...")
• 09:0509:05, 13 July 2017 Hardware/EIR/OpenOCD/Flashing (hist | edit) [2,472 bytes] Harald (talk | contribs) (Created page with "<div id="content"> = OpenOCD for AT91SAM7SE - Part 6 = This is part 6 of our OpenOCD for AT91SAM7SE tutorial. == Flashing the Target == Almost all tiny to...")
• 09:0409:04, 13 July 2017 Hardware/EIR/OpenOCD/CPU (hist | edit) [5,897 bytes] Harald (talk | contribs) (Created page with "<div id="content"> = OpenOCD for AT91SAM7SE - Part 3 = This is part 3 of our OpenOCD for AT91SAM7SE tutorial. == Configuring the CPU == === Declaring a TA...")
• 09:0409:04, 13 July 2017 Hardware/EIR/OpenOCD/Convent (hist | edit) [18,755 bytes] Harald (talk | contribs) (Created page with "<div id="content"> = OpenOCD for AT91SAM7SE - Part 8 = This is part 8 of our OpenOCD for AT91SAM7SE tutorial. == OpenOCD Script Conventions == So far we h...")
• 09:0309:03, 13 July 2017 Hardware/EIR/OpenOCD (hist | edit) [1,707 bytes] Harald (talk | contribs) (Created page with "<div id="content"> = Configuring OpenOCD for the AT91SAM7SE = The following tutorial will explain, how to use [http://openocd.sourceforge.net/ OpenOCD] with an AT91SAM7SE bo...")
• 09:0009:00, 13 July 2017 Hardware/EIR/OpenOCD/Clocks (hist | edit) [12,453 bytes] Harald (talk | contribs) (Created page with "<div id="content"> = OpenOCD for AT91SAM7SE - Part 4 = This is part 4 of our OpenOCD for AT91SAM7SE tutorial. == Configuring the Clocks == === Using Tcl =...")
• 08:5908:59, 13 July 2017 Hardware/EIR/No Radio (hist | edit) [874 bytes] Harald (talk | contribs) (Created page with "<div id="content"> = No Radio = Nut/OS comes with a number of [[../../documents/nutapps.html|application samples]], many of them will work on the EIR. The following tools a...")
• 08:5908:59, 13 July 2017 Hardware/EIR/MMC (hist | edit) [8,653 bytes] Harald (talk | contribs) (Created page with "<div id="content"> = EIR Memory Card Support = == Hardware == As explained on this page, the MMC socket is not connected to the hardware SPI. The following tab...")
• 08:5908:59, 13 July 2017 Hardware/EIR/JTAG (hist | edit) [10,961 bytes] Harald (talk | contribs) (Created page with "<div id="content"> = EIR JTAG = To our knowledge the best low cost solution so far is to use [http://openocd.sourceforge.net/ OpenOCD] with any FT2232 based adapter hardware...")
• 08:5808:58, 13 July 2017 Hardware/EIR (hist | edit) [7,181 bytes] Harald (talk | contribs) (Created page with "<div id="content"> = ELEKTOR Internet Radio = On April 2008, [http://www.elektor.com/ ELEKTOR magazine] published an article about an Internet Radio based on Nut/OS. In Nove...")
• 08:5708:57, 13 July 2017 Hardware/EIR/Expansion (hist | edit) [4,878 bytes] Harald (talk | contribs) (Created page with "<div id="content"> = EIR Expansion Port = == Expansion Connector K1 == Pin GPIO Periph.<br /> A Periph.<br /> B Usage 1 PA0 PWM0 A0/NBS0 '''Available for external hardwar...")
• 08:5708:57, 13 July 2017 Hardware/EIR/Debugging (hist | edit) [23,027 bytes] Harald (talk | contribs) (Created page with "<div id="content"> = Elektor Internet Radio Source Code Debugging = This document explains how to setup Eclipse and [http://openocd.sourceforge.net/ OpenOCD] to allow source...")
• 08:5608:56, 13 July 2017 Hardware/EIR/Assembly (hist | edit) [1,658 bytes] Harald (talk | contribs) (Created page with "<div id="content"> = Assembly Instructions = {| |width="50%"| [[../../../img/eir_leer.jpg|[[File:../../../img/eir_leer_thumb.jpg]]]] |width="50%"| EIR boards are shipped wit...")
• 08:5308:53, 13 July 2017 Hardware/Calypso Ports (hist | edit) [13,758 bytes] Harald (talk | contribs) (Created page with "<div id="content"> = SAM7X256-EK Ports = == Expansion Port J16 Row-A == {| ! Pin ! Port ! Peri.A ! Peri.B ! Usage |- | A1 | PA0 | RXD0 |   | Serial COM port if S15 closed...")
• 08:5208:52, 13 July 2017 Hardware/Boxed (hist | edit) [798 bytes] Harald (talk | contribs) (Created page with " <div id="content"> = Ethernut Boxed = * Picture 1: Front with Ethernut Logo. * Picture 2: Back side. * Picture 3: Top removed for Ethernut 1.3 access. * Picture 4: Front re...")
• 08:5108:51, 13 July 2017 Hardware (hist | edit) [877 bytes] Harald (talk | contribs) (Created page with "<div id="content"> = Supported Hardware = <div id="overview"> <div class="lboxof3"> == Reference Designs == ethernuts.html|[[File:../../img/ethernut_...")
• 08:5008:50, 13 July 2017 Hardware/Expansion (hist | edit) [13,673 bytes] Harald (talk | contribs) (Created page with "<div id="content"> = Ethernut Expansion Port = All Ethernut hardware reference designs share the same expansion port, a 64-pin header with two rows and 0.05" (2.54 mm)...")
• 08:4908:49, 13 July 2017 Hardware/Ethernuts (hist | edit) [1,431 bytes] Harald (talk | contribs) (Created page with "<div id="content"> = Ethernut Reference Boards = <div id="overview"> <div class="lboxof2"> == Ethernut 1 == enut1/index.html|[[File:../../img/ethernut_1_3_rev_h_pov_267...")
• 08:4908:49, 13 July 2017 Hardware/Boards (hist | edit) [14,690 bytes] Harald (talk | contribs) (Created page with "<div id="content"> = Officially Supported Boards = Officially supported means, that the board configuration is included in the Nut/OS distribution and that compiling and lin...")
• 08:4708:47, 13 July 2017 Hardware/Add Ons (hist | edit) [1,761 bytes] Harald (talk | contribs) (Created page with "<div id="content"> = Ethernut Add-On = <br /> == Medianut 2.0 == {| | '''Updated!'''<br /> Check this page for more information.            ...")
• 08:4408:44, 13 July 2017 Firmware/Porting (hist | edit) [19,315 bytes] Harald (talk | contribs) (Created page with "<div id="content"> = Nut/OS Porting Guide = Nut/OS is not just a kernel, it is a full operating system with peripheral drivers, file systems, network protocols etc. Porting...")
• 08:4308:43, 13 July 2017 Firmware/NutOS (hist | edit) [10,168 bytes] Harald (talk | contribs) (Created page with "<div id="content"> = Nut/OS = == Features == Nut/OS is based on an intentionally simple RTOS kernel, which provides a minimum of services to run Nut/Net, the TCP/IP stack....")
• 08:4208:42, 13 July 2017 Firmware/Nut Lua (hist | edit) [4,765 bytes] Harald (talk | contribs) (Created page with "<div id="content"> = Lua on Embedded Systems = == Introduction == [[File:../../img/lualogo.gif|128x128px|Lua Logo]] Quoting the creators: "Lua is a powerful, fast, lig...")
• 08:4108:41, 13 July 2017 Firmware/Applications (hist | edit) [3,910 bytes] Harald (talk | contribs) (Created page with "<div id="content"> = Developing Nut/OS Applications = Application development is done on a PC running Linux, Windows or Mac OS X. See the [[../tools/index.html|Tools]] page...")
• 08:4108:41, 13 July 2017 Firmware (hist | edit) [1,563 bytes] Harald (talk | contribs) (Created page with "= Ethernut Firmware = <div class="lboxof2"> == Nut/OS == Nut/OS is a modular, open source, real time operating system for embedded platforms. It is easily configurable and...")
• 08:4008:40, 13 July 2017 Firmware/Linker Scripts (hist | edit) [27,274 bytes] Harald (talk | contribs) (Created page with "<div id="content"> = GNU ARM Linker Scripts = No question, creating linker scripts is black magic for many developers. In the early days, when Nut/OS supports a single CPU,...")
• 08:3708:37, 13 July 2017 Ethernet Boot Loaders for AVR (hist | edit) [15,603 bytes] Harald (talk | contribs) (Created page with "The Ethernet boot loaders for the AVR based Ethernut boards fit into the upper section of the program memory and use DHCP and TFPT over Ethernet to download an application cod...")
• 08:3608:36, 13 July 2017 Download (hist | edit) [7,206 bytes] Harald (talk | contribs) (Created page with "<div id="content"> = Nut/OS Downloads = [http://sourceforge.net/projects/ethernut File:http://sflogo.sourceforge.net/sflogo.php?group_id=34079&type=10|80x15px|Get Ethernut...")
• 08:3508:35, 13 July 2017 Documents/Win Install (hist | edit) [7,718 bytes] Harald (talk | contribs) (Created page with "<div id="content"> = Installing Nut/OS on Windows = This document describes how to install the Nut/OS development environment on Windows. Linux/UNIX users should follow d...")
• 08:3408:34, 13 July 2017 Documents/Win Eclipse (hist | edit) [3,036 bytes] Harald (talk | contribs) (Created page with "<div id="content"> = Using Eclipse with Nut/OS on Linux = == Requirements == This is work in progress and for ARM target boards only. It is assumed that you already instal...")
• 08:3308:33, 13 July 2017 Documents/Webradio (hist | edit) [20,348 bytes] Harald (talk | contribs) (Created page with "<div id="content"> = AVR Internet Radio = <br /> == Introduction == This tutorial presents a step by step guide on how to build an stand-alone Embedded Internet Radio. The...")
• 08:3308:33, 13 July 2017 Documents/Watchdog (hist | edit) [481 bytes] Harald (talk | contribs) (Created page with "<div id="content"> = Hardware Watchdog = == About This Document == Previous Nut/OS releases supported the AVR platform only and application programmers could safely use the...")
• 08:3208:32, 13 July 2017 Documents/uHTTP Lib Uploads (hist | edit) [10,872 bytes] Harald (talk | contribs) (Created page with "<div id="content"> = MicroHTTP Library: Uploading Files = The capability to upload files can significantly improve the maintainability of your webserver based application. Y...")
• 08:3108:31, 13 July 2017 Documents/uHTTP Lib SSI (hist | edit) [4,467 bytes] Harald (talk | contribs) (Created page with "<div id="content"> = MicroHTTP Library: Using Server Side Includes = On this page I will explain how to create dynamic web content with the uhttplib.html|MicroHTTP library...")
• 08:3008:30, 13 July 2017 Documents/uHTTP Lib Forms (hist | edit) [8,486 bytes] Harald (talk | contribs) (Created page with "<div id="content"> = MicroHTTP Library: Basic Functions = This page gives you an overview of the application programming interface (API) provided by the uhttplib.html|Micr...")
• 08:3008:30, 13 July 2017 Documents/uHTTP Lib Basic.html (hist | edit) [8,213 bytes] Harald (talk | contribs) (Created page with "<div id="content"> = MicroHTTP Library: Basic Functions = This page gives you an overview of the application programming interface (API) provided by the uhttplib.html|Micr...")
• 08:2908:29, 13 July 2017 Documents/uHTTP Lib Auth (hist | edit) [1,725 bytes] Harald (talk | contribs) (Created page with "<div id="content"> = MicroHTTP Library: Basic Authentication = On this page we will look into basic access authentication, as it is provided by the uhttplib.html|MicroHTTP...")