Difference between revisions of "Hardware/EIR/OpenOCD/Hardware"
From Nutwiki
(Created page with "<div id="content"> = OpenOCD for AT91SAM7SE - Part 1 = This is the first part of our OpenOCD for AT91SAM7SE tutorial. == Hardware Setup == There's not muc...") |
(No difference)
|
Latest revision as of 11:05, 13 July 2017
OpenOCD for AT91SAM7SE - Part 1
This is the first part of our OpenOCD for AT91SAM7SE tutorial.
Hardware Setup
There's not much to explain here. Connect your JTAG adapter to the target board and your PC, then power up your target board.
[[EIR-JTAG-TURT.png|Connecting the JTAG adapter]] When using the Turtelizer 2 with the Elektor Internet Radio, you will also need a special JTAG connector adapter.