Hardware/EIR/OpenOCD/Hardware

From Nutwiki
Revision as of 10:05, 13 July 2017 by Harald (Talk | contribs) (Created page with "<div id="content"> = OpenOCD for AT91SAM7SE - Part 1 = This is the first part of our OpenOCD for AT91SAM7SE tutorial. == Hardware Setup == There's not muc...")

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

OpenOCD for AT91SAM7SE - Part 1

This is the first part of our OpenOCD for AT91SAM7SE tutorial.

Hardware Setup

There's not much to explain here. Connect your JTAG adapter to the target board and your PC, then power up your target board.

[[EIR-JTAG-TURT.png|Connecting the JTAG adapter]] When using the Turtelizer 2 with the Elektor Internet Radio, you will also need a special JTAG connector adapter.