Difference between revisions of "Nut/OS 5.1.0 installation on Debian Jessie (example with ARM target)"
From Nutwiki
(New page: == Prerequisites == sudo apt-get install make sudo apt-get install pkg-config sudo apt-get install libqtcore4 libqtgui4 libqt4-dev sudo apt-get install lua5.1 liblua5.1-0 liblua5.1-0-d...) |
m (1 revision imported) |
(No difference)
|
Latest revision as of 18:02, 27 October 2016
Prerequisites
sudo apt-get install make sudo apt-get install pkg-config sudo apt-get install libqtcore4 libqtgui4 libqt4-dev sudo apt-get install lua5.1 liblua5.1-0 liblua5.1-0-dev iblua5.1-dev
Howto
Download Ethernut OS sources and unpack it.
Go to unpacked directory 'cd ethernut-5.1.0'
Run:
./configure --disable-nutconf --disable-nutdisc
Run:
make sudo make install
Install GCC ARM compiler (see below)
Run:
qnutconf
GCC for ARM
sudo apt-get install gcc-arm-none-eabi gdb-arm-none-eabi binutils-arm-none-eabi
Install newlib (which is not included in Debian Jessie, so it has to be downloaded from Debian Sid): Go to following pages, download and install packages:
https://packages.debian.org/sid/libnewlib-dev https://packages.debian.org/sid/libnewlib-arm-none-eabi