timer.h

Go to the documentation of this file.

#ifndef _ARCH_CM3_TIMER_H_
#define _ARCH_CM3_TIMER_H_

/*
 * Copyright (C) 2001-2005 by egnite Software GmbH. All rights reserved.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 *
 * 1. Redistributions of source code must retain the above copyright
 *    notice, this list of conditions and the following disclaimer.
 * 2. Redistributions in binary form must reproduce the above copyright
 *    notice, this list of conditions and the following disclaimer in the
 *    documentation and/or other materials provided with the distribution.
 * 3. Neither the name of the copyright holders nor the names of
 *    contributors may be used to endorse or promote products derived
 *    from this software without specific prior written permission.
 *
 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
 * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
 * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
 * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
 * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
 * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
 * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
 * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF
 * THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
 * SUCH DAMAGE.
 *
 * For additional information see http://www.ethernut.de/
 */

/*
 * $Log$
 * Revision 1.7  2008/08/11 06:59:58  haraldkipp
 * BSD types replaced by stdint types (feature request #1282721).
 *
 * Revision 1.6  2008/08/06 12:51:11  haraldkipp
 * Added support for Ethernut 5 (AT91SAM9XE reference design).
 *
 * Revision 1.5  2007/08/17 10:44:38  haraldkipp
 * Timer enable/disable macro replaces previous global interrupt
 * enable/disable or function calling.
 *
 * Revision 1.4  2006/09/29 12:45:35  haraldkipp
 * Include clock configuration.
 *
 * Revision 1.3  2006/08/31 18:59:50  haraldkipp
 * Added support for the AT91SAM9260. We now determine between processor and
 * master clock. A new API function At91GetMasterClock() had been added to
 * query the latter.
 *
 * Revision 1.2  2006/02/23 15:33:59  haraldkipp
 * Support for Philips LPC2xxx Family and LPC-E2294 Board from Olimex added.
 * Many thanks to Michael Fischer for this port.
 *
 * Revision 1.1  2005/07/26 18:35:09  haraldkipp
 * First check in
 *
 */

#include <cfg/clock.h>
#include <compiler.h> // For deprecated warning.

#define NutEnableTimerIrq()     IntEnable(SysTick_IRQn)
#define NutDisableTimerIrq()    IntDisable(SysTick_IRQn)

#if defined(MCU_STM32)
#if defined(MCU_STM32F1) || defined(MCU_STM32L1) || defined(MCU_STM32F2)|| defined(MCU_STM32F4)

#define NUT_HWCLK_CPU   0

#define NUT_HWCLOCK_HCLK 1

#define NUT_HWCLK_PCLK1 2

#define NUT_HWCLK_PCLK2 3

#define NUT_HWCLK_ADC   4

#define NUT_HWCLK_MAX   4

#define NUT_HWCLK_PERIPHERAL NUT_HWCLK_PCLK1
#else
#warning "Unknown STM family"
#endif /* STM32 families */
#elif defined(MCU_LPC17xx)

#define NUT_HWCLK_CPU   0

#define NUT_HWCLK_PCLK  1

#define NUT_HWCLK_EMC   2

#define NUT_HWCLK_USB   3

#define NUT_HWCLK_WDT   4

#define NUT_HWCLK_MAX   4

#define NUT_HWCLK_PERIPHERAL NUT_HWCLK_PCLK

#else
#warning "Unknown CM3 family"
#endif

#endif /* _ARCH_ARM_TIMER_H_ */