Header file for basic multimedia card driver. More...

#include <sys/device.h>
#include <sys/file.h>

Include dependency graph for mmcard.h:

This graph shows which files directly or indirectly include this file:

Data Structures
struct	_MEMCARDSUPP
	Memory card support structure. More...
struct	_MMCIFC
	Low level access information structure. More...
struct	_MMC_CID
	Multimedia card identification register. More...
struct	_MMC_CSD
	Multimedia card identification register. More...
Defines
#define	NUTMC_SF_CD 0x01
#define	NUTMC_SF_WP 0x02
#define	NUTMC_IND_OFF 0
#define	NUTMC_IND_READ 1
#define	NUTMC_IND_WRITE 2
#define	NUTMC_IND_ERROR 4
#define	MMCMD_HOST 0x40
#define	MMCMD_RESET_CRC 0x95
#define	MMCMD_GO_IDLE_STATE 0
	Reset card to idle state.
#define	MMCMD_SEND_OP_COND 1
	Activate card's initialization process.
#define	MMCMD_ALL_SEND_CID 2
	Send operation condition register.
#define	MMCMD_SEND_RELATIVE_ADDR 3
	Assign relative card address.
#define	MMCMD_SELECT_CARD 7
	Assign relative card address.
#define	MMCMD_SEND_EXTCSD 8
	Query card's extended CSD.
#define	MMCMD_SEND_CSD 9
	Query card's CSD.
#define	MMCMD_SEND_CID 10
	Query card's CID.
#define	MMCMD_STOP_TRANSMISSION 12
	Stop multiple block transmission.
#define	MMCMD_SEND_STATUS 13
	Query card's status register.
#define	MMCMD_SET_BLOCKLEN 16
	Select block length for following read/write commands.
#define	MMCMD_READ_SINGLE_BLOCK 17
	Initiate single block read.
#define	MMCMD_READ_MULTIPLE_BLOCK 18
	Initiate continuous block read.
#define	MMCMD_WRITE_BLOCK 24
	Initiate single block write.
#define	MMCMD_WRITE_MULTIPLE_BLOCK 25
	Initiate continuous block write.
#define	MMCMD_PROGRAM_CSD 27
	Initiate programming of programmable CSD bits.
#define	MMCMD_SET_WRITE_PROTECT 28
	Enable card's optional write protection.
#define	MMCMD_CLR_WRITE_PROTECT 29
	Disable card's write protection.
#define	MMCMD_SEND_WRITE_PROTECT 30
	Query card's write protect status.
#define	MMCMD_TAG_ERASE_GROUP_START 35
	Set address of the first erase group.
#define	MMCMD_TAG_ERASE_GROUP_END 36
	Set address of the last erase group.
#define	MMCMD_ERASE 38
	Erase previously selected sectors.
#define	MMCMD_SEND_APP_OP_COND 41
	Activate SD card's initialization process.
#define	MMCMD_LOCK_UNLOCK 42
	Set/clear password or lock/unlock the card.
#define	MMCMD_SEND_APP_CMD 55
	Application command follows.
#define	MMCMD_READ_OCR 58
	Query card's operating condition register.
#define	MMCMD_CRC_ON_OFF 59
	Enable or disable CRC mode.
#define	MMR1_IDLE_STATE 0x00
	Card is idle.
#define	MMR1_NOT_IDLE 0x01
	Card is busy.
#define	MMR1_ERASE_RESET 0x02
	Erase sequence was cleared before execution.
#define	MMR1_ILLEGAL_COMMAND 0x04
	Illegal command code detected.
#define	MMR1_COM_CRC_ERROR 0x08
	Bad command CRC detected.
#define	MMR1_ERASE_SEQ_ERROR 0x10
	Bad erase sequence.
#define	MMR1_ADDRESS_ERROR 0x20
	Misaligned address did not match block length.
#define	MMR1_PARAMETER_ERROR 0x40
	Command parameter is out of range.
#define	MMR2_CARD_LOCKED 0x01
	Card is locked.
#define	MMR2_WP_ERASE_SKIP 0x02
	Erasing write protected sector or password error.
#define	MMR2_ERROR 0x04
	General or unknown error occured.
#define	MMR2_CC_ERROR 0x08
	Internal card controller error.
#define	MMR2_ECC_FAILED 0x10
	Bad internal ECC.
#define	MMR2_WP_VIOLATION 0x20
	Failed to write to protected block.
#define	MMR2_ERASE_PARAMETER 0x40
	Invalid erase parameter.
#define	MMR2_OUT_OF_RANGE 0x80
	Command parameter is out of range.
#define	MMCSR_OUT_OF_RANGE 0x80000000
#define	MMCSR_ADDRESS_ERROR 0x40000000
#define	MMCSR_BLOCK_LEN_ERROR 0x20000000
#define	MMCSR_ERASE_SEQ_ERROR 0x10000000
#define	MMCSR_ERASE_PARAM 0x08000000
#define	MMCSR_WP_VIOLATION 0x04000000
#define	MMCSR_COM_CRC_ERROR 0x00800000
#define	MMCSR_ILLEGAL_COMMAND 0x00400000
#define	MMCSR_ERROR 0x00080000
#define	MMCSR_CIDCSD_OVERWRITE 0x00010000
#define	MMCSR_WP_ERASE_SKIP 0x00008000
#define	MMCSR_CARD_ECC_DISABLED 0x00004000
#define	MMCSR_ERASE_RESET 0x00002000
#define	MMCSR_STATE_MASK 0x00001E00
#define	MMCSR_READY_FOR_DATA 0x00000100
#define	MMCSR_IS_IDLE 0x00000000
#define	MMCSR_IS_READY 0x00000200
#define	MMCSR_IS_IDENT 0x00000400
#define	MMCSR_IS_STBY 0x00000600
#define	MMCSR_IS_TRAN 0x00000800
#define	MMCSR_IS_DATA 0x00000A00
#define	MMCSR_IS_RCV 0x00000C00
#define	MMCSR_IS_PRG 0x00000E00
#define	MMCSR_IS_DIS 0x00001000
#define	MMDR_ACCEPTED
#define	MMDR_CRC_ERROR
#define	MMDR_WRITE_ERROR
#define	MMCERR_TIMEOUT 0x00000001
#define	MMCOP_NBUSY 0x80000000
#define	MMCARD_CIDR_SIZE 16
	Number of bytes in the CID register.
#define	MMCARD_CSDR_SIZE 16
	Number of bytes in the CSD register.
#define	MMCARD_OCR_SIZE 32
	Number of bytes in the operating condition register.
Typedefs
typedef struct _MEMCARDSUPP	MEMCARDSUPP
	Memory card support structure.
typedef struct _MMCIFC	MMCIFC
	Low level access information structure.
typedef struct _MMC_CID	MMC_CID
	Multimedia card identification register.
typedef struct _MMC_CSD	MMC_CSD
	Multimedia card identification register.
Functions
int	MmCardDevInit (NUTDEVICE *dev)
	Initialize high level MMC driver.
int	MmCardIOCtl (NUTDEVICE dev, int req, void conf)
	Perform MMC control functions.
int	MmCardBlockRead (NUTFILE nfp, void buffer, int len)
	Read data blocks from a mounted partition.
int	MmCardBlockWrite (NUTFILE nfp, const void buffer, int len)
	Write data blocks to a mounted partition.
int	MmCardBlockWrite_P (NUTFILE *nfp, PGM_P buffer, int len)
	Write data blocks from program space to a mounted partition.
NUTFILE *	MmCardMount (NUTDEVICE dev, const char name, int mode, int acc)
	Mount a partition.
int	MmCardUnmount (NUTFILE *nfp)
	Unmount a previously mounted partition.
int	SpiMmcInit (NUTDEVICE *dev)
	Initialize MMC driver.
int	SpiMmcIOCtl (NUTDEVICE dev, int req, void conf)
	Perform MMC control functions.
int	SpiMmcBlockRead (NUTFILE nfp, void buffer, int num)
	Read data blocks from a mounted partition.
int	SpiMmcBlockWrite (NUTFILE nfp, const void buffer, int num)
	Write data blocks to a mounted partition.
int	SpiMmcBlockWrite_P (NUTFILE *nfp, PGM_P buffer, int len)
	Write data blocks from program space to a mounted partition.
NUTFILE *	SpiMmcMount (NUTDEVICE dev, const char name, int mode, int acc)
	Mount a partition.
int	SpiMmcUnmount (NUTFILE *nfp)
	Unmount a previously mounted partition.
Voltage Ranges
#define	MMCARD_165_195V 0x00000080
#define	MMCARD_20_21V 0x00000100
#define	MMCARD_21_22V 0x00000200
#define	MMCARD_22_23V 0x00000400
#define	MMCARD_23_24V 0x00000800
#define	MMCARD_24_25V 0x00001000
#define	MMCARD_25_26V 0x00002000
#define	MMCARD_26_27V 0x00004000
#define	MMCARD_27_28V 0x00008000
#define	MMCARD_28_29V 0x00010000
#define	MMCARD_29_30V 0x00020000
#define	MMCARD_30_31V 0x00040000
#define	MMCARD_31_32V 0x00080000
#define	MMCARD_32_33V 0x00100000
#define	MMCARD_33_34V 0x00200000
#define	MMCARD_34_35V 0x00400000
#define	MMCARD_35_36V 0x00800000
Control Codes
#define	MMCARD_GETSTATUS 0x2001
	Retrieve card status.
#define	MMCARD_GETOCR 0x2002
	Retrieve operation condition register.
#define	MMCARD_GETCID 0x2003
	Retrieve card identification.
#define	MMCARD_GETCSD 0x2004
	Retrieve card specific data.
#define	MMCARD_GETEXTCSD 0x2005
	Retrieve extended card specific data.

Detailed Description

Header file for basic multimedia card driver.

 *
 * $Log$
 * Revision 1.5  2008/10/03 11:28:58  haraldkipp
 * Corrected and modified initialization of MultiMedia and SD Cards.
 *
 * Revision 1.4  2008/08/11 06:59:59  haraldkipp
 * BSD types replaced by stdint types (feature request #1282721).
 *
 * Revision 1.3  2006/10/08 16:48:09  haraldkipp
 * Documentation fixed
 *
 * Revision 1.2  2006/09/05 12:34:55  haraldkipp
 * Added commands for native MMC interface.
 *
 * Revision 1.1  2006/01/05 16:32:10  haraldkipp
 * First check-in.
 *
 *
 *

Data Structures

Defines

Typedefs

Functions

Voltage Ranges

Control Codes

Detailed Description